Merlo TF65.9T-170

Merlo TF65.9T-170 MERLO Merlo TF65.9T-170 The TF65.9 has a maximum capacity of 6,500kg and top lifting height of 8.8m. TF65.9T-170 TF65.9T-170CS TF65.9-170CS CVT ENQUIRE Download the Brochure Attributes Lift height 8.8 m Maximum reach 4.7 m Maximum load capacity 6500 kg Details The new TF65.9 telehandler complements the high capacity range offered into the Agricultural and Waste re-handling market sectors. This new turbofarmer, developed to guarantee fast handling of large quantities of material, is used in the world of biogas, cereal farms, industry, landfill and recycling, sawmills, etc. The TF65.9 comes with standard Cab Suspension: the exclusive patented and dampened CS with active hydropneumatic suspension, can be switched off directly by the operator. The low frequency system allows the drastic reduction of vibrations inside the passenger compartment and facilitates the absorption of the stress and vibrations transmitted during the transfer and work phases, even on rough grounds. The cab is also FOPS (level II) and ROPS certificated, ensuring the highest level of safety for the operator; The TF65.9 is equipped with the new ASCS system (Adaptive Stability Control System) provided with a 10.1” colour screen: this allows to display the capacity diagram, updated in real time, according to the operating conditions (load handled, implement in use, stability index). This tool also allows: setting and managing the geometric limits of machine use; setting and adjusting the maximum speed of hydraulic movements detecting and storing the amount of loads handled The user interface is completed with the capacitive electronic joystick control with vertical handle. This solution allows operating in total safety and simplicity, activating the boom movements only by gripping the control with the hand; The whole range can counts on the standard Frame Levelling Control that, integrated into the chassis, allows the operator to offset the ground slopes to work in total safety. On sloping terrain the machine can correct the lateral inclination by 8%, permitting the boom to be moved out perpendicularly to work in conditions of maximum efficiency and safety; ZM3-type carriage: the carriage rotation kinematics has been redesigned to increase the drawing off force. As standard, this machine is equipped with the hydraulic implement clamping device. In addition, there is a double-acting hydraulic outlet on the nose. Boom Suspension, Tractor Approval, Pick Up Hitch, Hydraulic tra